About This

• Magnet Load Capacity: Securely holds single knives weighing ≤ 500g (e.g., 8-inch chef knives, 6-inch paring knives) with a total load capacity of ≤ 2kg. Not suitable for heavy knives such as cleavers or butcher knives over 500g, as they will exceed the magnet’s force and cause sliding.
• Drill-Free Installation Surfaces: Only compatible with smooth, non-porous, fully cured surfaces, including smooth ceramic tiles, glass (e.g., refrigerator doors), sealed wooden panels, and polished acrylic boards. Do NOT use on rough concrete walls, uncured latex-painted walls, textured wallpaper, porous stone walls, or uneven drywall.
• Magnet Compatibility & Load Capacity: ① Material Requirement: Only works with ferromagnetic stainless steel knives (e.g., 430 stainless steel, high-carbon stainless steel with sufficient iron content).
• Adhesive Curing Instruction: After attaching the holder to the qualified surface, press firmly for 30 seconds to expel air bubbles. Then, allow 24 hours of undisturbed curing time before hanging any knives. Skipping or shortening the curing period will significantly weaken bonding and lead to the holder falling off.
• Detailed Installation Steps: ① Clean the target surface thoroughly with alcohol wipes to remove dust, oil, or grease (dirty surfaces reduce adhesion); ② Peel off the protective film on the adhesive backing and align the holder with the installation position; ③ Press the holder firmly along its entire length for 30 seconds to ensure full contact; ④ Leave the holder unused for 24 hours to let the adhesive cure completely; ⑤ Hang only ferromagnetic

Overview

• Color : Light Brown
• Material : Acacia Wood
• Brand : MHXW SXPN
• Product Dimensions : 0.67"D x 2.48"W
• Is Dishwasher Safe : Yes